Makerbase MKS DLC32 MAX 4 Axis Controller Board
Upgrade your laser engraver or CNC machine with the Makerbase MKS DLC32 MAX motherboard — a 4-axis controller board ideal for woodwork engraving. Reliable, high-performance, and perfect for DIY projects.
Makerbase MKS DLC32 MAX Motherboard – 4-Axis Controller for Laser Engraving Machine and CNC Woodwork Engraver Parts Upgrade Board
Upgrade your CNC and laser engraving projects with the Makerbase MKS DLC32 MAX Motherboard. This 4-axis controller board is built with ESP32 technology for smooth, reliable control of laser engraving machines and CNC woodwork engravers. As an upgraded version of the DLC32 series, it delivers enhanced performance for DIY makers, hobbyists, and professional engravers. Ideal for wood engraving, laser cutting, and 4-axis CNC operations. Compatible with Makerbase CNC systems.
- 4-axis control – supports complex CNC and engraving operations
- ESP32 technology – smooth and responsive control for precision work
- Upgraded DLC32 MAX version – enhanced performance over previous models
- Ideal for laser engraving and woodworking projects
- Compatible with Makerbase CNC systems
Why Choose Makerbase MKS DLC32 MAX Controller Board
Key Features
- 4-Axis Control Capability – Supports up to 4 axes for advanced CNC milling, laser engraving, and 3D carving projects. Perfect for complex multi-axis operations.
- ESP32 Powered – Built with ESP32 microcontroller technology. Provides Wi-Fi and Bluetooth connectivity options (depending on firmware), faster processing, and smoother motion control compared to older 8-bit boards.
- Upgraded DLC32 MAX Design – Enhanced version of the popular DLC32 series. Features improved circuit layout, better thermal management, and increased stability for long engraving sessions.
- Laser Engraving Optimized – Specifically designed for diode laser engravers. Supports laser power control (PWM) and precise XY movement for detailed wood, acrylic, and leather engraving.
- Makerbase Compatible – Seamlessly integrates with Makerbase CNC systems. Also works with popular firmware like GRBL, LightBurn, and LaserGRBL for easy setup and operation.
Compatibility and Best Use
- DIY Laser Engraving Machines – Perfect for building or upgrading diode laser engravers (e.g., 5W, 10W, 20W lasers) for wood, plywood, MDF, acrylic, leather, and paper.
- CNC Woodwork Engravers – Ideal for small CNC routers and carving machines used for wood signs, relief carving, PCB milling, and soft metal engraving.
- 4-Axis CNC Projects – Suitable for projects requiring rotary axis (4th axis) such as cylindrical engraving on cups, pens, or rolling pins.
- Makerbase System Upgrades – Drop-in replacement or upgrade for older Makerbase controllers. Check wiring compatibility before installation.
- Open Source Firmware – Works with GRBL, LightBurn, LaserGRBL, and other popular open source CNC control software.
Installation and Setup Tips
- Check Power Supply Requirements – Ensure your power supply matches the board’s voltage requirements (typically 12V-24V DC). Use a regulated power supply with sufficient amperage for your stepper motors and laser.
- Update Firmware – Download the latest firmware from Makerbase GitHub or official source. Use ESP32 flashing tools to upload. Verify configuration for your specific machine (axis steps, laser PWM settings).
- Wire Stepper Motors Carefully – Connect stepper motors to X, Y, Z, and A (4th axis) terminals. Double-check wiring order (A+, A-, B+, B-) to avoid motor jitter or non-movement.
- Configure Laser PWM – For laser engraving, connect laser module’s PWM control pin to the designated spindle/Laser output. Set correct PWM frequency and active high/low in firmware.
- Test Without Power First – Before applying power, use a multimeter to check for shorts between power and ground. Power on and test each axis movement with low speed before full operation.
Product Specifications
Packing List
- 1 x MKS DLC32 MAX Motherboard (Control Board)
- 1 x USB Cable (Type-C or Micro USB – check version)
- Pin headers and basic connectors (may vary)
- Stepper motor drivers NOT included (sold separately)
- Power supply NOT included
Warnings and Safety Notes
- Disconnect power before wiring – Always turn off and unplug power supply before connecting or disconnecting any wires to prevent short circuits and board damage.
- Mind polarity – Reverse polarity (connecting positive to negative) will permanently damage the board. Double-check all power connections before powering on.
- Use adequate cooling – Use a cooling fan on stepper drivers and main board if operating at higher currents or in enclosed spaces. Overheating may cause erratic behavior or component failure.
- Laser safety – When controlling a laser module, always use appropriate laser safety glasses. The board itself is not a laser – follow your laser’s safety guidelines.
- Static sensitive – Handle the board with anti-static precautions. Touch a grounded metal object before handling. Store in anti-static bag when not in use.
- Firmware compatibility – Incorrect firmware settings may cause unexpected movement or laser firing. Test with low power and no material first. Always home the machine before operation.
- Not for medical or life support – This board is for hobby and industrial CNC/laser applications only. Not certified for medical devices or critical safety systems.
Watch the MKS DLC32 MAX controller in action:
Welcome deal (Fresh Spring Savings): US $20.44 + save US $4.45 (regular US $24.89)
US $2.00 off on US $15.00 | Tax excluded: Added at checkout if applicable
Color: MKS DLC32 MAX | Rating: 4.8 out of 5 stars (31 reviews, 1198 sold)
